Reichenbach

Drawing Machines

08 – Intermediate Drawing Machine

SKU TFR.03.C.13.26/01 Category Tag

Application / Product Range:

• For drawing aluminum or bare copper wire.

• Nº of wires:1.

Technical data

(we reserve the right to modify technical data and characteristics at any time):

• Wet drawing machine for non-ferrous materials, drawing system with cones.

• Direction of operation: Right.

• Maximum operating speed: 30 m/s.

• Max. inlet ø mm: 4.11 mm.

• Min./max outlet ø mm: 1.00/2.20.

• Reduction in area between dies: 20.6 % (26 % elongation).

• Dies dimensions ø: 28 x 25 mm.

• 4 internal drawing cones and 1 external capstan of hardened a steel covered with tungsten carbide.

• Quick ø change system.

• Gear transmission in oil bath.

• The wire drawing compartment and die holders are accessible through a sliding door, designed to prevent fluid leaks during operation.

• The wire drawing fluid distribution system is performed by pipes and die holders especially designed to ensure proper dies lubrication.

• Lower tank for draining drawing solution with a pump, configured for interconnection with centralized system.

• 2 drives with frequency inverters and synchronization, one for drawing machine and one for the final capstan (rapid change of ø).

• Operating voltage: 380 V. 60 Hz (Other to be confirmed).

Supplementary equipment:

• Payoff/ Unwinding machine.

• Wire pointing machine

• Welding machine.

• Continuous Annealer for copper RCR.03. V /2800.

• Speed and winding tension control dancer.

• Take-up DIN 400 or 630 coils.