Application/Product Range:
• For drawing bare copper or aluminum and aluminum alloy wires.
• No. of wires: 01 or 02.
Technical data
(we reserve the right to modify technical data and characteristics at any time):
• Wet drawing for non-ferrous materials, tandem drawing system with controlled slippage.
• Equipped with 15 drives, one for each shaft/capstan, synchronized by PLC/frequency inverters.
• Direction of operation: Right.
• Maximum operating speed m/s: 35.
• Max. ∅ for aluminum inlet mm: 9.50.
• Min./max. outlet ∅ mm: 1.30/4.50.
• No. of drafts (*): 15.
• Dies dimensions ∅ mm: 50 x 36.
• Reduction in area between dies: 6.5 to 24.8% (7 to 33% of elongation).
• Rotating end-die holder.
• Ceramic rings, 6 x ∅ 450 + 9 x 300 mm.
• Die holder immersed in drawing bath capstans semi immersed in drawing bath.
• The wire drawing compartments and die holders are accessible through light doors and tilting protectors, designed to prevent fluid leaks from the lubricant bath.
• Lower collector tank of drawing lubricant, configured for interconnection with centralized system.
• Operating voltage: 380V 60 Hz (Other to be confirmed).
• Jogging command (with pedals), for mounting dies on the machine.
(*) The drawing machine can be manufactured from 7 to 15 drawing drafts.
Supplementary equipment:
• Rod payoff.
• Rod welding machine.
• Rod sharpener.
• Continuous annealer, 3.500 to 6.000A. (For copper)
• Speed control and winding tension controller dancer.
• Single or double automatic take up for DIN 630 or 800mm spool.
• Downcoiler Machine (Cage) ø 800 mm or ø 1000 mm.
